ZL 900X2200 Automatic Flexo Water Iink Printer Slotter Machine for Corrugated Box
I. Introduction
This machine is manual operation and vacuum absorption auxiliary lead edge feeding system. It can slot, cut the corner, cut the extra side and press the lines of the corrugated cardboard. The slotting width is electric adjustment, and it attached a ruler that the scale can be read easily. The slotting phase adjustment is planetary gear structure. The machine adopts 360°electric adjustment. The up and down slotting knives and creasing knives can move synchronously. Adopt multi-group communication type computer adjustment, main computer adopt big screen PLC control. Hanging plate with foot type on-off. Scorer wheels are pre-press and double press. This small machine is easy to operate and repair easily which is specialized for slotting small boxes.
Technology parameter:
| Model | 2300X900 |
| Max machine speed | 200 pieces/min |
| Max feeding size (L * W) | 2300mmX900mm |
| Width of printing roller | 2200mm |
| Max printing size | 2200x850mm |
| Min feeding size (L * W) | 600mmX230mm |
| Min slotting interval | 230mmX60mmX230mmX60mm |
| Min height of box (H) | 1150mm |
| Wall board thickness | 50mm |
II. Printing part
1. Adopts Φ296mm high quality thick seamless steel tube which is surface grinding and hard chromium plating.
2. Adopts Φ175.56mm 220 mesh high quality steel anilox roller which is produced by Dalian.
3. Adopts Φ160mm rubber roller made by Chunfeng Jizhou. It is wear-resisting, oil resistance and acid and alkali resistant. The roller is in highly grinding so it is easy to print.
4. The pressure adjustment of printing roller adopt high precision crosshead shoe gapless adjustment to do the slight adjustment, can make the printing pressure reach best condition.
5. 360°electric phase, printing motor button phase adjust mechanism adopt planetary gear structure, can freely adjust machine work or stop 360°by electric button when machine running.
6. Ink pump provide ink automatically, lift printing plate pneumatic. also with the automatic ink distribution system, which avoid the bad influence to the printing result when ink dry out because of machine stop running. Used 1.2inch PVC ink-back tube, smooth tube wall avoid ink-stuff up and sticking, can send the ink to ink bucket in time to avoid ink-leak phenomenon.
III. Main structure and features
1. Feeding paper roller adopt rubber roller and patterned roller connected with four rollers feeding type, feeding paper roller pressure adjustment adopt eccentric wheel adjust and left-right eccentric wheel, adjust the pressure synchronous
2. Pushing paperboard department adopt both sides baffle and latter baffle to fasten paperboard, to avoid the slotting error when pushing paperboard which make upper paperboard misplace, can fit to every kinds paperboard, and sending paper stable and accurate.
3. Slotting plate adopt full steel processed accessories, slotting knives adopt zigzag arc-shaped semicircle knives to slot and remove the scrap, paperboard get into slitting roller after slotting, slitting knives slit both sides of the paperboard(note:pressing wheel and slitting knives in one roller)
4. Paperboard is send out by transport roller after slotting, corner-cutting, slitting, pressing, this machine scorer part have pre-press shaft and pre-press wheel, main press shaft and main press wheel avoid scoring paper broken.
5. This machine adopt electric planetary gear phase to adjust paperboard size, can adjust without stopping.
pictures:
Product Tags:
|
|
900X2200 Automatic Flexo Water Iink Printer Slotter Machine for Corrugated Box Images
|
